SS Sealer Stripper™ Specialty Clean
SS Sealer Stripper is formulated to remove old sealers and coatings from hardscape surfaces, preparing them for resealing or when a change in sealer type is desired. It’s designed to be used on concrete, pavers, natural stone, and other hardscape materials. SS Sealer Stripper is particularly useful when you need to remove a worn or yellowed sealer or when you want to apply a different type of sealer to your hardscape. For best results, apply the SS Sealer Stripper generously to the surface, allow it to soak, and then scrub and rinse thoroughly.
- Aids in removal of sealing and curing compounds
- Industrial Strength
- Graffiti/Dry Fog Paints
- Tile/Carpet Adhesive
- Biodegradable
- Concrete Pavers
- Clay Pavers
- Concrete Permeable Pavers
- Wetcast
- Granite/Quartz
- Marble/Travertine
- Limestone
- Bluestone/Sandstone
- Block Retaining Wall
SS Sealer Stripper | Specialty Clean
| PART NUMBER | SIZE | AMT PER CTN | QUANTITY |
| SSS STRIPPER CTN | 1 GAL | 4/CTN | 36 CTNS/PLT |
| SSS STRIPPER5 | 5 GAL | 1 | 36/PLT |
CONTRACTORS: If you are a contractor looking to try one of our products, click here for a dealer in your area, or click here to connect with your local sales rep for a demo.
DEALERS: If you are a dealer looking for an in-store demo or to bring a product in, click here to find your local sales rep.
HOMEOWNERS: If you are a homeowner, click here to find a dealer in your area.
SS Sealer Stripper Instructions
-
CLIMATE
- Product is supplied in a ready-to-use state. No stirring or thinning is required.
- Before using this product, thoroughly read the product’s label and Safety Data Sheet (SDS).
- Test in an inconspicuous area before starting the general application to ensure desired results.
- Recommended application temperatures are 50°F – 80°F (10°C – 27°C).
- Product is supplied in a ready-to-use state. No stirring or thinning is required.
-
APPLY
- Work in small areas (no larger than 10 sq. ft.).
- Apply to dry pavers.
- Products may be applied to both vertical and horizontal surfaces by brush at a rate of approximately 200 ft 2/gallon.
-
WAIT
- Allow 10 minutes for the stripper to soak into and soften the coating for removal.
-
PRESSURE WASH
- Use pressure washer with a medium nozzle (yellow).
- Start at an elevation of 4″ and move closer until sealer turns white and peals off the surface.
- Difficult areas may need a second treatment. Sealer may re-adhere if not completely removed.
-
COVERAGE
- Up to 200 sq. ft. per gallon (15.58 sq. m. per 3.78 liters). Coverage may vary depending on surface and application.
-
CLEAN UP & STORAGE
- Store container in a cool area with cap or lid firmly in place.
-
USER TIPS
- Test in an inconspicuous area before starting the general application to
ensure desired results. - Wear eye protection and rubber gloves when applying SS.
- Prolonged contact of cleaner on metal or other surfaces may result in etching or damage.
- Saturate vegetation before and after application.
- Always use a PW Paver Wash or DW Dual Wash prior to resealing.
- Not for use on plastic, plastic composite materials, rubber or fiberglass.
- Not for use on stamped concrete.
- Test in an inconspicuous area before starting the general application to
Video
SRW SS Sealer Stripper gets rid of your toughest sealants, adhesives, and paints faster than any other product. Save time and money with our easy-to-use solutions for your hardscape and landscape surfaces.Related products
Where can I buy SS Sealer Stripper?
Call us at 1-800-752-9326 or use our dealer locator. We will gladly help locate a dealer near you!
Do you have additional questions? Contact us.