PREP

• Thoroughly sweep surface of joint sand, dust, debris or loose material.
• Spot clean if needed with one of these SRW Specialty Clean™ products:
  • CD = Cleaner & Degreaser
  • MC = Mold, Moss & Mildew Cleaner
  • OC = Organic Stain Cleaner

WET

• Dilute equal parts SW with warm clean water.
• Saturate surface & surrounding area (including vegetation) thoroughly with water.
• Do not allow product to dry on surface. Re-spray with water, if needed, to keep area wet. A 2-person application is recommended.

APPLY

• Apply mixture directly to surface with a sprinkler can.
• Scrub with a stiff bristle brush. Let sit for 5 minutes. Keep wet. Rescrub.
• For large areas, work in 200 sq. ft. (18.58 sq. m.) sections
• If working on an incline, start at the highest point, working in small sections. Scrub from bottom of section, pushing excess SW up over job.

RINSE

• Immediately rinse surface & surrounding areas (including vegetation) thoroughly with clean water until all traces of cleaner disappear.
• Repeat if necessary. Let dry.
• Wait at least 24 hours to apply SRW Stone Seal™ products.