Paver Rail
SRW Paver Rail spikes and staples can be used with any of our Paver Rail edging options. We conveniently carry an option of 10” or 12” spikes for your project needs. Our staples make for a simple install and save you money.
Universal Paver Rail™
Benefits
- Permanent and invisible barrier between hardscapes and other landscape materials
- Product height 1-7/8"
- Best all-around product
Applications
- Straight and curved applications
- For use with spikes, staples or stakes
Low Profile Paver Rail™
Benefits
- Can be installed against wetcast or natural stone to prevent shifting
- Product height 1-3/16"
- Ideal for Natural Stone
Applications
- Low profile applications like natural stone
- For use with spikes, staples or stakes
Flex Paver Rail™
Benefits
- Can be applied on both straight and curved application
- Product height 1-7/8"
- Most flexible option
Applications
- Straight and curved applications
- For use with spikes or staples
Instructions
Installing before pavers: Place PAVER RAIL on top of uniformly compacted graded gravel base per pavement design and stake edging using the 10" edging staples supplied (10"x3/8" landscape spikes may also be used).
Installing after pavers: Use a hand trowel to carefully pull back screeded sand from the edging area. Place PAVER RAIL firmly against the pavers using the 10" edging staples supplied (10"x3/8" landscape spikes may also be used).
Joining sections: Join sections by using a staple to adjoin the pieces. As shown in diagram (a).
Fastening: Support the staple (b) and lightly tap the staple in part way to accommodate for edging adjustment, if needed. When finished adjusting, tap in the staples tight to the edging. Space remaining staples every 12"-24" apart or as needed on curves. When backfilling with a non-compactible material, more staples may be required for added support.
To finish: After all pavers are in place, sweep surface to remove all debris. Using a plate compactor, make multiple passes over the entire area to set pavers. Sweep SRW Polymeric Sand into joints until the joints are filled. Alternate compacting and sweeping sand into joints until the joints are solid. Backfill the outside of edging with top soil, sod, seed or mulch. To clean and seal pavers use SRW Paver Seal and cleaner products available from your local SRW dealer.
Packaging
Universal Paver Rail™ • Height 1 7/8˝
| PART NUMBER | SIZE | AMT PER CTN | QUANTITY |
|---|---|---|---|
|
PRAIL UNIV |
7'8" | 12/BNDL | 48 BNDLS/PLT |
Low Profile Paver Rail™ • Height 1 3/16˝
| PART NUMBER | SIZE | AMT PER CTN | QUANTITY |
|---|---|---|---|
|
PRAIL UNIVLP |
7'8" | 12/BNDL | 48 BNDLS/PLT |
Flex Paver Rail™ • Height 1 7/8˝
| PART NUMBER | SIZE | AMT PER CTN | QUANTITY |
|---|---|---|---|
|
PRAIL EX |
7'8" | 12/BNDL | 48 BNDLS/PLT |
Ready to purchase?
Dealers/Distributors: Contact our Customer Service Team, or your SRW Sales Representative to place an order.
Contractors & Homeowners: Visit our Dealer Locator to find out where you can purchase our products!
Frequently Asked Questions
Call us at 1-800-752-9326 or use our dealer locator. We will gladly help locate a dealer near you!
Universal Paver Rail and Flex Paver Rail can be used for any straight or curved edge. The Low Profile Paver Rail is intended for flagstone patios/walkways.
Roughly 12 – 18 inches apart around curved surfaces they should be closer (6-9 inches)