Pro Plus V™ Premium Landscape Fabric
Pro Plus V™ is a superior quality, woven geotextile produced by needlepunching non-woven fabric into the weave to form a high strength fabric with better water permeability. The polypropylene fibers are specially formulated to resist UV light deterioration, and are inert to commonly encountered soil chemicals. The fabric will not rot or mildew, is non-biodegradable, and is resistant to damage from insects and rodents.
- Strength of a woven, permittivity of a non-woven
- Weed Control
- Planting stripes make spacing easier
- Retains moisture for plant health
- Weed barrier under landscape beds, gardens, decks, patios and sidewalks
- Soil and landscape stabilization
PART NUMBER | SIZE | SQ YDS/ROLL | QUANTITY |
FPPV 03250 | 3´x250´ | 83.33 | 20/PLT |
FPPV 04250 | 4´x250´ | 111.11 | 20/PLT |
FPPV 05250 | 5´x250´ | 138.89 | 20/PLT |
FPPV 06250 | 6´x250´ | 166.66 | 20/PLT |
FPPV 08250 | 8´x250´ | 222.22 | 4/BNDL |
FPPV 08250F* | 8´x250´ | 222.22 | 9/PLT-4/BNDL |
FPPV 12250 | 12´x250´ | 333.33 | 4/BNDL |
FPPV 12250 | 12´x250´ | 333.33 | 9/PLT-4/BNDL |
Visit our Dealer Locator to find out where you can purchase our products!
Pro Plus V™ Premium Landscape Fabric Instructions
Prepare Area
Remove all weeds from the desired area. For added protection, apply pre-emergent herbicide before laying down fabric. For best weed control and soil stabilization, install fabric with fuzzy side facing the ground. For mulch stabilization, install the fuzzy side up.
Place Fabric
Unroll fabric and cut to desired length. Fit fabric around plants, lights, etc., by cutting slits“X” where needed. Overlapping a minimum 4-6 inches and secure with SRW Fabric Staples, staggering 1.2 staples per square yard.
Cover Fabric
Immediately cover over with 3-4 inches of mulch, bark, decorative rock or stone to protect fabric from sunlight and to enhance the appearance of your project.
Where can I buy Premium Landscape Fabrics?
Call us at 1-800-752-9326 or use our dealer locator. We will gladly help locate a dealer near you!
What is the proper way to install Pro Plus?
Does it matter which side of Pro Plus IV or V I put against the ground?
Do you have additional questions? Contact us.