SF-8™ Cleaner

SF-8™ Cleaner is a strong and fast-acting adhesive cleaner for our SRW SF-8™ Adhesive to clean up residual adhesive. The cleaner is used to clear out the SF-8™ Dispenser Gun easily and effectively while the attached spray nozzle is used for spot cleaning on job sites for quick clean-up.

ESSENTIAL COMPANION PRODUCTS:                                     
SF-8™ Adhesive 
SF-8™ Dispenser Gun

Contact Us
View Tech Sheets
Contractors & Homeowners

Visit our Dealer Locator to find out where you can purchase our products!

Contact Us

Sf-8™ Cleaner Instructions

CLEANING A DISPENSER GUN

  1. Remove excess adhesive from nozzle.
  2. Remove empty SF-8 canister.
  3. Screw SF-8 Cleaner canister and pull trigger until cleaner flows out of nozzle.
  4. Allow cleaner to remain in dispenser gun for roughly 15 minutes.
  5. Spray cleaner until it comes out clear.
  6. Remove SF-8 Cleaner canister from dispenser gun.
  7. Always remove SF-8 Cleaner from dispenser gun when finished.
  8. Clean and dry screw thread on the canister.
  9. Attach new SF-8 Adhesive canister onto dispenser gun. Spray until adhesive runs through nozzle.
  10. Always store an open SF-8 Adhesive canister on dispenser gun.

 

TO REMOVE NON-CURED ADHESIVE

  1. Attach provided spray nozzle to SF-8 Cleaner canister.
  2. Spray cleaner on affected area.
  3. Wipe off any residue from surface and reapply if necessary.

 

STORAGE

Store canister upright. Do not puncture, incinerate or store above 100°F (38°C).

 

USER TIPS

When cleaning dispenser gun make sure to do this away from the project and/or into a container to avoid residual adhesive from staining the project.

Customers Also Search

Related products

Frequently Asked Questions
Call us at 1-800-752-9326 or use our dealer locator. We will gladly help locate a dealer near you!

1 can = 600 linear feet with a 3/8” bead
1 can = 20+ traditional adhesive tubes with a 3/8” bead

Do you have additional questions? Contact us.

Download Our Catalog
Download