RE Rust Eliminator™ Specialty Clean

RE Rust Eliminator is a powerful, concentrated cleaner that removes difficult rust stains from pavers, concrete, and masonry hardscape surfaces. Our fast-acting formula dissolves rust stains and rinses clean with rinsing. It is effective on fresh and old rust stains caused by metal, hard water, high iron aggregate, and fertilizer granules, making it a versatile solution for rust-related issues. 

Remember to spot clean with an SRW Specialty Cleaner first, then clean the entire surface with PW Paver Wash™ or DW Dual Wash™ before sealing.

Why is cleaning before sealing important? Always clean before you seal for the best sealing results. SRW Products always recommends using PW Paver Wash™ or DW Dual Wash™ before sealing a project. Cleaning solutions pull dirt and debris out, opening up pores and leaving an ideal surface for the sealer to bond, while pressure washing alone drives dirt and debris deeper into the pores.

Contact Us
View Tech Sheets
Looking to Buy?
 

CONTRACTORS: If you are a contractor looking to try one of our products, click here for a dealer in your area, or click here to connect with your local sales rep for a demo.

DEALERS: If you are a dealer looking for an in-store demo or to bring a product in, click here to find your local sales rep.

HOMEOWNERS: If you are a homeowner, click here to find a dealer in your area.

RE Rust Eliminator Instructions

  1. Apply Cleaner

    1. Recommended application temperatures are 50°F – 80°F (10°C – 27°C).
    2. Wet surface and surrounding area of the stain with water. Do not apply cleaner directly on dry surfaces.
    3. Do not allow the product to dry on the surface; keep it wet.

  2. Scrub Surface

    1. Using rubber gloves and proper eye protection, generously pour RE Rust Eliminator over the stain.
    2. Scrub with a stiff bristle brush until dissolved.

  3. Rinse Surface

    1. Immediately and thoroughly rinse area with water.

  4. Repeat

    1. For stubborn stains, repeat steps as necessary. 
    2. A SRW general-purpose cleaner should be used prior to sealing.

  5. COVERAGE

    1. Spot treatment. Coverage will vary. 

  6. CLEAN UP & STORAGE

    1. Rinse tools with water until clean. Keep in a well ventilated, cool and dry place. KEEP FROM FREEZING.

  7. USER TIPS

    1. Test in an inconspicuous area before starting the general application to
      ensure desired results.
    2. Not for use on sealed surfaces.
    3. Not for use on poured (colored/stamped) concrete surfaces.
    4. Not for use on Wetcast.
    5. Not for use on Limestone.
    6. Not for use on Marble/Travertine.

Tech Sheets

Safety Sheet

Video

SRW RE Rust Eliminator does the job in as little as four easy steps. Remove rust stains quickly and effectively with no additional equipment needed.
Customers Also Search

Related products

Frequently Asked Questions

Call us at 1-800-752-9326 or use our dealer locator. We will gladly help locate a dealer near you!

We do not recommend the use of RE Rust Eliminator on materials like Limestone. It is likely to alter or change the appearance of the stone.

Do you have additional questions? Contact us.

Download Our Catalog
Download