SRW Rock Binder™
Rock Binder™ is a liquid-bonding agent that holds a variety of rocks and aggregates up to 3/4” angular stone and 3/8” round stone together. It bonds and stabilizes rocks and aggregates to reduce the effects of blow-out from heavy wind or leaf blowers, washout from heavy rain, and other environmental elements. Safe for use around children, plants, and animals. The surface remains flexible, allowing water to pass through.
- Use on sand or dirt to control dust in decorative areas
- Surface remains flexible and permeable
- Helps minimize weed growth
- Easy to apply with sprayer (purchased separately)
- Reaches full bond in 24-48 hours
- Allows surfaces to drain and breathe
- Environmentally safe, Low VOC
- Non-toxic and Breathable
- Safe for Kids, Plants, and Animals
- Reduces Landscape Maintenance
- Controls Dust and Erosion
Please note that the aggregates can be up to 3/4” angular or 3/8” round stone for SRW Rock Binder™ to work as desired.
- Pebbles, Light Rock and Gravel
- Pea Gravel
- Decomposed Granite
- Chip Stone
- Sand/Dirt
Coverage: Covers up to 200 sq. ft. per gallon (18.58 sq. m per 3.78 liters)
| PART # | SIZE | AMT PER CTN | QUANTITY |
| TAC RB CTN | 1 GAL | 4/CTN | 36 CTNS/PLT |
| TAC RB 5GAL | 5 GAL | 1 | 36/PLT |
Rock Binder™ Instructions
- Spread aggregate and lightly tamp/compact into place.
- Rinse the rock before applying SRW Rock Binder™ to remove dust. Let dry before applying SRW Rock Binder™.
- Stir SRW Rock Binder™ well before each use
- With a pressurized sprayer, spray SRW Rock Binder™ in a slow, even, saturating coat.
- First Coat: Spray SRW Rock Binder™ in a slow, even saturating coat.
Note – the product goes on white and dries clear - Wait 15 – 30 minutes before applying the second coat, allowing the first coat to partially dry and become tacky. Typically, when the product is no longer white.
- Second Coat: Spray in a slow, even saturating coat.
- Let dry for 24 hours without rain, sprinklers, or extreme humidity. Dry time may vary based on the temperature.
- When using SRW Rock Binder™ for dust and erosion control, please refer to our User Tips for instructions.
CLEANUP:
- Immediately rinse off all equipment with clean water and let dry.
USER TIPS:
- Intended for decorative areas only
- Apply with a pressurized sprayer
- Maximum bond strength after 24 hours
- DO NOT apply if rain, or in extreme humidity is forecast within 24 hours. The area must remain dry during the curing process. (Bond time will be longer with colder temperatures and shorter with higher temperatures.)
- Avoid spraying directly onto plants or trees
- Always test in a small, discrete area before use
- Sprays on white, dries clear
- For dust and erosion control: Dilute 1 part SRW Rock Binder™ with 5 parts water.
- NOT recommended for areas with foot or vehicle traffic
APPLICATION AND CURING TEMPERATURES:
- 50-80° F (10-26° C)
STORAGE:
- KEEP FROM FREEZING. Store container in a cool dry area with lid firmly in place.
Video
Our SRW Rock Binder™ bonds and stabilizes rocks and aggregates to reduce the effects of blow-out from heavy wind or leaf blowers, washout from heavy rain, and other environmental elements. Safe for use around children, plants, and animals.
Related products
If you are a contractor looking to try one of our products, click here for a dealer in your area, or click here to connect with your local sales rep for a demo.
If you are a dealer looking for an in-store demo or to bring a product in, click here to find your local sales rep.
If you are a homeowner, click here to find a dealer in your area.
Where can I buy an SRW Rock Binder™?
Call us at 1-800-752-9326 or use our dealer locator. We will gladly help locate a dealer near you!