LG Low Gloss

LG Low Gloss sealer is a low-gloss, color-enhancing paver sealer that stabilizes joint sand and protects against sand washout, weed growth and ant infestation. It extends paver life while providing an attractive surface sheen.

Benefits

  • Low-gloss finish, color enhancing
  • Stabilizes joint sand from washout, weeds & ants
  • Minimizes salt and freeze/thaw damage
  • Provides UV protection
  • Interior/Exterior

Applications

  • Concrete Pavers
PaverSealer_Chart_2021
PaverSeal_SpecsAccChart_2021

Instructions

CLEAN

  • Wait 28 days after installing polymeric sand before sealing.
  • Thoroughly sweep surface of joint sand or loose material.
  • Spot clean if needed with one of these SRW cleaning products:
    • CD = Cleaner & Degreaser for oil and grease spots
    • RE = Rust Eliminator for rust and mineral removal
  • Prepare all pavers with one of these SRW cleaning products:
    • EF = for Efflorescence removal
    • PW = Paver Wash for general cleaning & polyhaze removal.

CLIMATE

  • After cleaning, wait at least 24 hours before sealing. Surface and joints must be completely dry.
  • Recommended application temperatures are 50°F-80°F (10°C-27°) from installation through the cure process.
  • Do not apply if inclement weather is forecasted within 24 hours

APPLY

  • STIR THOROUGHLY
  • Apply with an SRW Products approved Slit Foam Roller and sprayer.
  • Spray then back roll. This prevents an uneven finish. A 2-person application is recommended.
  • Always spray against a wet edge and do not overlap a previously sealed and dried area.
  • Start at the highest project eleveation
  • Do not allow sealer to pool on pavers or in joints.
  • Repeat if desired.

CURE

  • Allow sealed area to dry and cure 24 hours.
  • Protect area from water and rain until dry.
  • Dry-tack free: 25 minutes
  • Foot traffic: 24 hours
  • Vehicle traffic: 72 hours

Note all calculations based on 68°F-77°F (20°C-25°C)

Packaging

Paver Seal™ LG Low Gloss

PART NUMBER SIZE AMT PER CTN QUANTITY
SSPS CTN 1 gal 4/CTN 36 CTNS/PLT
SSPS 5 GAL 5 gal 1 36/PLT

Paver Seal™ LG CARB Low Gloss

PART NUMBER SIZE AMT PER CTN QUANTITY
SSPC LG CARB CTN 1 gal 4/CTN 36 CTNS/PLT
SSPC LG CARB 5GAL 5 gal 1 36/PLT

Ready to purchase?

Dealers/Distributors: Contact our Customer Service Team, or your SRW Sales Representative to place an order.

Contractors & Homeowners: Visit our Dealer Locator to find out where you can purchase our products!

Frequently Asked Questions

Call us at 1-800-752-9326 or use our dealer locator. We will gladly help locate a dealer near you!

Wait for sand to fully cure before sealing. We recommend using an SRW General Cleaner before any sealer job. The use of an SRW General Cleaner ensures the pores on the surface of the pavers are ready to accept SRW Products Sealers.

We recommend waiting 60-90 days after the paver was manufactured before sealing. The paver manufacture date is typically provided on the pallet label.  We always recommend using an SRW General Cleaner such as PW Paver Wash or EF Efflorescence cleaner prior to sealing pavers.

Yes. A SRW Products Slit Foam Roller or SRW Products Slit Foam Roller X-TREME roller is the best choice for backrolling because it helps evenly distribute the sealer and prevent it from pooling. The SRW Products Slit Foam Roller has been specifically designed for highly textured surfaces and pavers.

We recommend using SRW Products SS Sealer Striper. SS Sealer Stripper is a biodegradable, yet industrial-strength formula that removes sealing and curing compounds. Contact one of our territory managers if you have questions about removing a specific type of sealer.

SRW Products XY Xylene is a fast-acting solvent that thins and dissolves acrylic sealer to aid in tool clean up and overspray. 

Yes, we recommend sealing on a pool deck.

 

Sealing with non-film forming sealers: Penetrating sealers are non-film forming that help minimize water and dissolved solids from absorbing into the pavers.

 

Sealing with film-forming sealers: If you will be using a film-forming sealer on a pool deck then we recommend the use of our X-TREME line of sealers (HGX, LGX etc.) with the addition of SR-Paver Grip to help with slip resistance. SR Paver Grip is sold in 3.2oz bags. 1 Bag of SR Paver Grip can be mixed with 1 gallon of SRW Products Sealers.